Model No. | ML85 |
Brand Name | PURUI |
Trade Term | FOB , CIF , |
Payment Term | T/T , D/A , |
Certification | CE , CSA , |
chengdu purui polymer engineering co,.ltd | |
Membership | Free![]() |
Region | China |
Contact | jennifer qing |
PURUI Plastic Recycling Machinery, Plastic Pelletizer and Plastic Granule Making Machine
ML 85/33 PP woven bag, waven sack, fiber, film and non-woven bag recycling extruder, pull strip pelletizing granualtor, plastic pelletizier, plastic recycling machine and extruder
Products name: Single screw extruder
Using area: clean PE,PP film, bag, silk or material within 5% water content
Material type: PP,PE,LDPE, LLDPE,HDPE,BOPP,CPP, PET,PA, EPE, etc
Work flow general introduction:
material can be cut, mixed, pre-homogenized and pre-dried in the shredder drum. The whole set can complete the material cutting, granulating and pelletizing process. Film can go directly to the shredder drum without using crusher.
Advantages:
two people one line
power consumption: 0.27kw/kg-0.30kw/kg
processing ability:100kg/h to 1500kg/h
machine specification:
Model | ML75 | ML85 | ML100 | ML130 | ML160 | ML180 |
Screw diameter(mm) | 75 | 85 | 100 | 130 | 160 | 180 |
Output(kg/h) | 100-120 | 100-180 | 200-300 | 400-600 | 600-800 | 800-1000 |
Waste plastic material(e.g. Film, fiber) is fed into cut compactor automatically by belt conveyor (roll-intake device is available to equip as option). In-feed rate is controlled via motor amperage of the cut compactor, therefore, there is no need for manual dosing by operator.
The material is then chopped, warmed, dried and agglomerated by the drum of cut compactor and is generated with best condition for extruder screw feeding. The degree of generating can be varied by adjusting the load on the shredding motor.
Once the material has been fed into the extruder screw, it is plasticized, the molten plastic is degassing by either atmosphere venting or vacuum venting system(option).
The molten plastic now flows through the screen-changer which is operated hydraulically, and leaves extruder screw through the discharge or die. Some waste plastic contains high percentage of moisture or heavy printed ink, in this case, second venting and plasticizing device. I.e. By utilizing baby extruder is highly recommended. Please refer diagrams showing next page, type H-SPH and H-DCW.
On the request, self-clean back flush filter can be supplied as option.
The molten plastic is flowed and cut by hot face water ring pelletizer, delivered to centrifuge for drying. Then, pellet is delivered to discharge cyclone through suction blowo(pellet classifier can be installed before the suction blowero on request).
In addition to hot face water ring pelletizer, strand pelletizer and under watering pelletizer can be supplied according to process requirement(Please refer to diagram showing next page).
machine specification :
Model name | ML |
output | Plastic pellets/granules/resins/plastic raw material |
Machine parts | Belt conveyor, cutter compactor, main extruder, pelletizing unit, cooling system, silo, cabinet |
Recycling material | PP/PE/LDPE/HDPE film, bag, fiber |
Capacity range | 100kg/h to 1200kg/h |
Feeding way | Conveyor, roll driving system |
Screw diameter | 75mm to 200mm |
Screw L/D | 26 to 33 |
Screw raw material | 38CrMoAl or bimetallic |
degassing | Natural degassing, vacuum degassing |
Cutting type | Vertical pelletizing way, pull strip pelletizing |
Cooling type | Water cool, air cool |
voltage | Customized |
Optional devices | Metal detector, water cooling system, feeding silo, vibration system |
Delivery time | 40 to 60 days |
Warranty time | 13 months |
Technical supports | Machine layout, installation layout, engineer oversea service |
certificate | CE/ SGS/ TUV/ CO |
Suppliers
PET Bottle Recycling Machines
Plastic Pelletizers
Plastic Washers
Plastic Shredders
Floatation Tanks
Wastewater Treatment Equipment
Plastic Recycling Dryers
Label Separators
Plastic Crushers
Plastic Extrudsion Machines
Plastic Recycling Machines
Environmental Protection Equipment